trajectory_id stringlengths 41 52 | problem_id stringlengths 11 22 | domain stringclasses 6
values | turn int64 0 0 | accumulated_directives listlengths 0 0 | prompt stringlengths 298 2.31k | target_output stringlengths 441 2.88k | source_candidate_ids listlengths 1 1 | dataset_tier stringclasses 1
value | source stringclasses 3
values | instruction stringlengths 298 2.31k | input stringclasses 1
value | output stringlengths 441 2.88k |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
E3_solver_canonical_llm:physgym_0653:turn0 | physgym_0653 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A massless insulating string of length $a$ is fixed at one end, ... | **Derivation:**
Step 1: If the ring is a superconducting ring, when it moves in a magnetic field, due to the properties of the superconductor, the magnetic flux in the ring remains unchanged, i.e.: $$ L I + B S = B \cdot \pi r^2 $$ Thus, the current in the ring is: $$ \begin{array}{l}{I = \displaystyle\frac{B}{L}(\pi r... | [
"physgym_0653_sol1"
] | E3_solver_canonical_llm | physgym_seed | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A massless insulating string of length $a$ is fixed at one end, ... | **Derivation:**
Step 1: If the ring is a superconducting ring, when it moves in a magnetic field, due to the properties of the superconductor, the magnetic flux in the ring remains unchanged, i.e.: $$ L I + B S = B \cdot \pi r^2 $$ Thus, the current in the ring is: $$ \begin{array}{l}{I = \displaystyle\frac{B}{L}(\pi r... | |
E3_solver_canonical_llm:physgym_0039:turn0 | physgym_0039 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A rectangular wooden block of height $H$ and density $\rho_{1}$ ... | **Derivation:**
Step 1: Taking the top at equilibrium as the origin, establish the coordinate system as shown.
Step 2: Let the position of the top of the block be $y$. The net force on the block is $-\rho_{1}H S g + \rho_{2}(H-h_{0}-y)S g = -\rho_{2}S g y$. The net force on the block is a linear restoring force, and it... | [
"physgym_0039_sol1"
] | E3_solver_canonical_llm | physgym_seed | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A rectangular wooden block of height $H$ and density $\rho_{1}$ ... | **Derivation:**
Step 1: Taking the top at equilibrium as the origin, establish the coordinate system as shown.
Step 2: Let the position of the top of the block be $y$. The net force on the block is $-\rho_{1}H S g + \rho_{2}(H-h_{0}-y)S g = -\rho_{2}S g y$. The net force on the block is a linear restoring force, and it... | |
E3_solver_canonical_llm:physgym_0401:turn0 | physgym_0401 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A certain planet has a smooth and elastic surface, perfect for p... | **Derivation:**
Step 1: The two components of the initial throw speed are:
$$
v_{r}=k v_{0}\sin\theta\quad,\quad v_{\theta}=k v_{0}\cos\theta
$$
Step 2: Based on the symmetry of the starting and landing points with respect to the major axis of the elliptical orbit, and combining the definition of the restitution coeffi... | [
"physgym_0401_sol1"
] | E3_solver_canonical_llm | physgym_seed | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A certain planet has a smooth and elastic surface, perfect for p... | **Derivation:**
Step 1: The two components of the initial throw speed are:
$$
v_{r}=k v_{0}\sin\theta\quad,\quad v_{\theta}=k v_{0}\cos\theta
$$
Step 2: Based on the symmetry of the starting and landing points with respect to the major axis of the elliptical orbit, and combining the definition of the restitution coeffi... | |
E3_solver_canonical_llm:physgym_0674:turn0 | physgym_0674 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A coin is placed at rest on the edge of a smooth tabletop, with ... | **Derivation:**
Step 1: The moment of inertia of the coin about the axis is \[J=\frac14mr^2\] According to the impulse and impulse-momentum theorem, about the center of mass we have \[I+I_N=m v_0, Ir-I_Nr=J\omega_0\] There is also the velocity relation \[v_0=\omega_0 r\] Therefore, we have \[v_0=\frac{8I}{5m}, \omega_0... | [
"physgym_0674_sol1"
] | E3_solver_canonical_llm | physgym_seed | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A coin is placed at rest on the edge of a smooth tabletop, with ... | **Derivation:**
Step 1: The moment of inertia of the coin about the axis is \[J=\frac14mr^2\] According to the impulse and impulse-momentum theorem, about the center of mass we have \[I+I_N=m v_0, Ir-I_Nr=J\omega_0\] There is also the velocity relation \[v_0=\omega_0 r\] Therefore, we have \[v_0=\frac{8I}{5m}, \omega_0... | |
E3_solver_canonical_llm:lit_em_0005:turn0 | lit_em_0005 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Consider the following four potentials, which exist in some
regi... | **Derivation:**
Step 1: In each case, the electric field is minus the
derivative of the potential. Potentials 1 and 2 give the same field,E =−a.
Step 2: These are uniform fields. The constant a is the
strength of the field, and b is just an arbitrary
constant with no physical significance.
Step 3: Potentials 3 and 4 bo... | [
"lit_em_0005_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Consider the following four potentials, which exist in some
regi... | **Derivation:**
Step 1: In each case, the electric field is minus the
derivative of the potential. Potentials 1 and 2 give the same field,E =−a.
Step 2: These are uniform fields. The constant a is the
strength of the field, and b is just an arbitrary
constant with no physical significance.
Step 3: Potentials 3 and 4 bo... | |
E3_solver_canonical_llm:lit_em_0021:turn0 | lit_em_0021 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Suppose a charged particle is moving through a region of
space i... | **Derivation:**
Step 1: The electric force is either in the same direction as the electric field or in the opposite direction, depending on whether the particles are
positively or negatively charged.
Step 2: Since the magnetic force is perpendicular to both v and B
and the question states that the electric field is
per... | [
"lit_em_0021_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Suppose a charged particle is moving through a region of
space i... | **Derivation:**
Step 1: The electric force is either in the same direction as the electric field or in the opposite direction, depending on whether the particles are
positively or negatively charged.
Step 2: Since the magnetic force is perpendicular to both v and B
and the question states that the electric field is
per... | |
E3_solver_canonical_llm:lit_em_0022:turn0 | lit_em_0022 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
At a particular point in time and space, an electromagnetic
plan... | **Derivation:**
Step 1: Since it’s a plane wave, the direction of
the magnetic field is perpendicular to the electric field and the direction of propagation, so it
must be in the ±y direction.
Step 2: What gives E× B
in the positive z direction is if the magnetic field
is in the +y direction. The Poynting vector is S =... | [
"lit_em_0022_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
At a particular point in time and space, an electromagnetic
plan... | **Derivation:**
Step 1: Since it’s a plane wave, the direction of
the magnetic field is perpendicular to the electric field and the direction of propagation, so it
must be in the ±y direction.
Step 2: What gives E× B
in the positive z direction is if the magnetic field
is in the +y direction. The Poynting vector is S =... | |
E3_solver_canonical_llm:lit_em_0036:turn0 | lit_em_0036 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A charged particle is released from rest. We see it start to
mov... | **Derivation:**
Step 1: There must be either E or B or both,
since some force caused the particle to accelerate. It can’t be a pure magnetic field, because
F = qv× B is zero for v = 0, so the particle
would not have accelerated from rest.
Step 2: It can’t
be a pure electric field, because a uniform electric field would... | [
"lit_em_0036_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A charged particle is released from rest. We see it start to
mov... | **Derivation:**
Step 1: There must be either E or B or both,
since some force caused the particle to accelerate. It can’t be a pure magnetic field, because
F = qv× B is zero for v = 0, so the particle
would not have accelerated from rest.
Step 2: It can’t
be a pure electric field, because a uniform electric field would... | |
E3_solver_canonical_llm:lit_em_0040:turn0 | lit_em_0040 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A Helmholtz coil is defined as a pair of identical circular coil... | **Derivation:**
Step 1: The field at any point on the axis can be
found by adding the contributions to the field
from the two loops. The center of the entire apparatus does not, however, coincide with the center of either loop: in each case it is out of that
plane by a distance h/2.
Step 2: By symmetry, both
these fiel... | [
"lit_em_0040_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A Helmholtz coil is defined as a pair of identical circular coil... | **Derivation:**
Step 1: The field at any point on the axis can be
found by adding the contributions to the field
from the two loops. The center of the entire apparatus does not, however, coincide with the center of either loop: in each case it is out of that
plane by a distance h/2.
Step 2: By symmetry, both
these fiel... | |
E3_solver_canonical_llm:lit_em_0046:turn0 | lit_em_0046 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Find the inductance of two identical inductors in parallel.
| **Derivation:**
Step 1: The definition of inductance is U =
LI2/2. If we think of the pair of inductors as
91
one big inductor, then applying this definition,
I has to be the total current that goes in.
Step 2: This
gets split in half, so the energy stored in a single
inductor is Uone = Lone(I/2)2/2, and the total
ener... | [
"lit_em_0046_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Find the inductance of two identical inductors in parallel.
| **Derivation:**
Step 1: The definition of inductance is U =
LI2/2. If we think of the pair of inductors as
91
one big inductor, then applying this definition,
I has to be the total current that goes in.
Step 2: This
gets split in half, so the energy stored in a single
inductor is Uone = Lone(I/2)2/2, and the total
ener... | |
E3_solver_canonical_llm:lit_em_0055:turn0 | lit_em_0055 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
In example 6, p. 101, we analyzed a spherical capacitor.
Buildin... | **Derivation:**
Step 1: Doing this using the relation U =
q2/2C would be fairly complicated, since the energy density is not constant.
Step 2: We would have to
find the energy stored in a spherical shell betweenr andr +dr, and then integrate to findU. It’s much easier to do this using C =q/V , since
we already know how... | [
"lit_em_0055_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
In example 6, p. 101, we analyzed a spherical capacitor.
Buildin... | **Derivation:**
Step 1: Doing this using the relation U =
q2/2C would be fairly complicated, since the energy density is not constant.
Step 2: We would have to
find the energy stored in a spherical shell betweenr andr +dr, and then integrate to findU. It’s much easier to do this using C =q/V , since
we already know how... | |
E3_solver_canonical_llm:lit_em_0057:turn0 | lit_em_0057 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Suppose you are holding your hands in front of you, 10 cm
apart.... | **Derivation:**
Step 1: A force of 10 26 N is enough to pulverize
a planet, so the cancellation is obviously very
nearly perfect; even a very tiny percentage
difference in charge would lead to a huge
force.
Step 2: If the fractional difference was ϵ, then
the total charge on each hand would be ϵq,
where q = 10 26e as e... | [
"lit_em_0057_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Suppose you are holding your hands in front of you, 10 cm
apart.... | **Derivation:**
Step 1: A force of 10 26 N is enough to pulverize
a planet, so the cancellation is obviously very
nearly perfect; even a very tiny percentage
difference in charge would lead to a huge
force.
Step 2: If the fractional difference was ϵ, then
the total charge on each hand would be ϵq,
where q = 10 26e as e... | |
E3_solver_canonical_llm:lit_em_0058:turn0 | lit_em_0058 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Consider the electric field created by a uniform ring of total
c... | **Derivation:**
Step 1: Imagine breaking the ring down into
many tiny pieces, like a necklace. These pieces
all contribute to the field at the point we’re talking about, and their contributions add like vectors.
Step 2: The components of these vectors parallel
to the plane of the ring all cancel out, but the
components... | [
"lit_em_0058_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Consider the electric field created by a uniform ring of total
c... | **Derivation:**
Step 1: Imagine breaking the ring down into
many tiny pieces, like a necklace. These pieces
all contribute to the field at the point we’re talking about, and their contributions add like vectors.
Step 2: The components of these vectors parallel
to the plane of the ring all cancel out, but the
components... | |
E3_solver_canonical_llm:lit_em_0063:turn0 | lit_em_0063 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
In example 8, p. 59, we found that the field of a uniform,
strai... | **Derivation:**
Step 1: V =−
E dr
=−2kλ lnr + const. This is a little bit of a strange-looking expression,
because normally we can’t evaluate a transcendental function on an input that has units.
Step 2: However, we can get away with this in the case of a
log, because ln(a/b) = lna−lnb, so if we wanted
to make the unit... | [
"lit_em_0063_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
In example 8, p. 59, we found that the field of a uniform,
strai... | **Derivation:**
Step 1: V =−
E dr
=−2kλ lnr + const. This is a little bit of a strange-looking expression,
because normally we can’t evaluate a transcendental function on an input that has units.
Step 2: However, we can get away with this in the case of a
log, because ln(a/b) = lna−lnb, so if we wanted
to make the unit... | |
E3_solver_canonical_llm:lit_em_0070:turn0 | lit_em_0070 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
The Earth and Moon are bound together by gravity. If, instead, t... | **Derivation:**
Step 1: Letq stand for the absolute values of the
charges, which are equal to each other. We can
find the force either by using Newton’s law of
gravity or by using the kinematical equationa =
v2/r for the moon’s acceleration.
Step 2: Choosing the
first approach, we have
kq2
r2 =Gm1m2r2 ,
which we solve ... | [
"lit_em_0070_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
The Earth and Moon are bound together by gravity. If, instead, t... | **Derivation:**
Step 1: Letq stand for the absolute values of the
charges, which are equal to each other. We can
find the force either by using Newton’s law of
gravity or by using the kinematical equationa =
v2/r for the moon’s acceleration.
Step 2: Choosing the
first approach, we have
kq2
r2 =Gm1m2r2 ,
which we solve ... | |
E3_solver_canonical_llm:lit_em_0071:turn0 | lit_em_0071 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Consider the electric field created by a uniform ring of total
c... | **Derivation:**
Step 1: For a = 0, the field is zero, which makes
sense, because we expect perfect cancellation at
the center of the ring.
Step 2: For very large values of a,
b becomes negligible compared to a, so the field
is kqa(a2)−3/2 =kq/a2, which is just what we’d
expect for any charge q at a distance a.
Step 3: ... | [
"lit_em_0071_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Consider the electric field created by a uniform ring of total
c... | **Derivation:**
Step 1: For a = 0, the field is zero, which makes
sense, because we expect perfect cancellation at
the center of the ring.
Step 2: For very large values of a,
b becomes negligible compared to a, so the field
is kqa(a2)−3/2 =kq/a2, which is just what we’d
expect for any charge q at a distance a.
Step 3: ... | |
E3_solver_canonical_llm:lit_em_0073:turn0 | lit_em_0073 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Find the capacitance of two identical capacitors in series.
| **Derivation:**
Step 1: The capacitors have a total of four
plates, and the two in the middle, which are connected, are isolated, so their total charge will always be zero.
Step 2: Therefore, the two middle plates
must have the same amount of charge but with
opposite signs. Thus the pattern of charges on
the four plate... | [
"lit_em_0073_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Find the capacitance of two identical capacitors in series.
| **Derivation:**
Step 1: The capacitors have a total of four
plates, and the two in the middle, which are connected, are isolated, so their total charge will always be zero.
Step 2: Therefore, the two middle plates
must have the same amount of charge but with
opposite signs. Thus the pattern of charges on
the four plate... | |
E3_solver_canonical_llm:lit_em_0083:turn0 | lit_em_0083 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Each bulb has a resistance of one ohm. How much power is
drawn f... | **Derivation:**
Step 1: Like the preceding problem, this one
can’t be solved by breaking the circuit down into
parallel and series parts.
Step 2: Unlike that one, there is
no easy way to solve it by symmetry. We simply
have to use the loop rule and the junction rule
to write down enough equations to solve for all
the u... | [
"lit_em_0083_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Each bulb has a resistance of one ohm. How much power is
drawn f... | **Derivation:**
Step 1: Like the preceding problem, this one
can’t be solved by breaking the circuit down into
parallel and series parts.
Step 2: Unlike that one, there is
no easy way to solve it by symmetry. We simply
have to use the loop rule and the junction rule
to write down enough equations to solve for all
the u... | |
E3_solver_canonical_llm:lit_em_0087:turn0 | lit_em_0087 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Find a vector that is perpendicular to both of the following
two... | **Derivation:**
Step 1: The easiest way to find such a vector is to
take the cross product. (A× B)x =AyBz−ByAz =−3
(A× B)y =AzBx−BzAx = 6
(A× B)z =AxBy−BxAy =−3
335
So our vector is −3ˆx + 6ˆy− 3ˆz.
Step 2: We could also
use any other vector lying along the same line,
i.e., any scalar multiple of this one. I checked my... | [
"lit_em_0087_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Find a vector that is perpendicular to both of the following
two... | **Derivation:**
Step 1: The easiest way to find such a vector is to
take the cross product. (A× B)x =AyBz−ByAz =−3
(A× B)y =AzBx−BzAx = 6
(A× B)z =AxBy−BxAy =−3
335
So our vector is −3ˆx + 6ˆy− 3ˆz.
Step 2: We could also
use any other vector lying along the same line,
i.e., any scalar multiple of this one. I checked my... | |
E3_solver_canonical_llm:lit_em_0090:turn0 | lit_em_0090 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
The following data give the results of two experiments in which
... | **Derivation:**
Step 1: The second data-point isn’t very surprising, because multiplying charge by −2 and the
velocity by−1 multiplies the magnetic force by
(−2)(−1) = 2.
Step 2: The only thing the second datapoint really tells us is that the field is purely
magnetic. If the F, v, and B vectors had to
be perpendicular,... | [
"lit_em_0090_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
The following data give the results of two experiments in which
... | **Derivation:**
Step 1: The second data-point isn’t very surprising, because multiplying charge by −2 and the
velocity by−1 multiplies the magnetic force by
(−2)(−1) = 2.
Step 2: The only thing the second datapoint really tells us is that the field is purely
magnetic. If the F, v, and B vectors had to
be perpendicular,... | |
E3_solver_canonical_llm:lit_em_0094:turn0 | lit_em_0094 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Resistors have a standard color code on them, but capacitors
oft... | **Derivation:**
Step 1: We need the trace on the left to show us
where “zero” is on this exponential curve. The
experimenter has adjusted the scope so that this
is on the line above the bottom line.
Step 2: We need
the trace on the right to show us enough time
resolution to get decent precision. In the trace
on the rig... | [
"lit_em_0094_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Resistors have a standard color code on them, but capacitors
oft... | **Derivation:**
Step 1: We need the trace on the left to show us
where “zero” is on this exponential curve. The
experimenter has adjusted the scope so that this
is on the line above the bottom line.
Step 2: We need
the trace on the right to show us enough time
resolution to get decent precision. In the trace
on the rig... | |
E3_solver_canonical_llm:lit_em_0101:turn0 | lit_em_0101 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Suppose that the potential had instead been
φ = a(x2 + y2 + z2) ... | **Derivation:**
Step 1: It would have had no effect. Mathematically,
the gradient operator ∇ is a kind of derivative,
and derivatives are linear and have the property
that the derivative of a constant is zero.
Step 2: Therefore adding a constant onto an expression never
has any effect on its derivative. Physically, the... | [
"lit_em_0101_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Suppose that the potential had instead been
φ = a(x2 + y2 + z2) ... | **Derivation:**
Step 1: It would have had no effect. Mathematically,
the gradient operator ∇ is a kind of derivative,
and derivatives are linear and have the property
that the derivative of a constant is zero.
Step 2: Therefore adding a constant onto an expression never
has any effect on its derivative. Physically, the... | |
E3_solver_canonical_llm:lit_em_0114:turn0 | lit_em_0114 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
We have referred to resistors dissipating heat, i.e., we have
as... | **Derivation:**
Step 1: To get negative values ofP , you’d have to
have opposite signs forI and ∆V . But you can’t
control the signs of I and ∆V independently —
switching the wires reverses both.
Step 2: The current
flows in response to the electric force, whose direction is related to the direction of the voltage
drop... | [
"lit_em_0114_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
We have referred to resistors dissipating heat, i.e., we have
as... | **Derivation:**
Step 1: To get negative values ofP , you’d have to
have opposite signs forI and ∆V . But you can’t
control the signs of I and ∆V independently —
switching the wires reverses both.
Step 2: The current
flows in response to the electric force, whose direction is related to the direction of the voltage
drop... | |
E3_solver_canonical_llm:lit_em_0117:turn0 | lit_em_0117 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
At a frequency of 53.1 kHz, a certain series LR circuit has an
i... | **Derivation:**
Step 1: In parallel, it will be the inverse
impedances that add. The total inverse
impedance is 1 /Z = (0.4− 0.3i) kΩ−1.
Step 2: The
real part of this can be contributed by the inverse resistance of a resistor with a resistance
of 2.5 kΩ. For the imaginary part, we need a
component whose inverse impedan... | [
"lit_em_0117_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
At a frequency of 53.1 kHz, a certain series LR circuit has an
i... | **Derivation:**
Step 1: In parallel, it will be the inverse
impedances that add. The total inverse
impedance is 1 /Z = (0.4− 0.3i) kΩ−1.
Step 2: The
real part of this can be contributed by the inverse resistance of a resistor with a resistance
of 2.5 kΩ. For the imaginary part, we need a
component whose inverse impedan... | |
E3_solver_canonical_llm:lit_em_0118:turn0 | lit_em_0118 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
To do this problem, you need to understand how to do
volume inte... | **Derivation:**
Step 1: Consider a ring extending from r to
r+dr around the wire. Its volume is proportional
to its circumference and to dr, so dV = (... )r dr,
where the ... stands for stuff that we don’t care
about because it won’t affect whether the result is infinite.
Step 2: The magnetic field varies as 1 /r,
and ... | [
"lit_em_0118_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
To do this problem, you need to understand how to do
volume inte... | **Derivation:**
Step 1: Consider a ring extending from r to
r+dr around the wire. Its volume is proportional
to its circumference and to dr, so dV = (... )r dr,
where the ... stands for stuff that we don’t care
about because it won’t affect whether the result is infinite.
Step 2: The magnetic field varies as 1 /r,
and ... | |
E3_solver_canonical_llm:lit_em_0125:turn0 | lit_em_0125 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A capacitance C and an inductance L are connected in
parallel. S... | **Derivation:**
Step 1: We have Z−1 = Z−1L +Z−1C , and if
we want no current to flow, then Z should be
infinite, so the right-hand side of this equation
needs to vanish.
Step 2: One term is positive imaginary
and the other negative imaginary, so this cancellation will happen whenever |ZL| =|ZC|.
Step 3: This
results in... | [
"lit_em_0125_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A capacitance C and an inductance L are connected in
parallel. S... | **Derivation:**
Step 1: We have Z−1 = Z−1L +Z−1C , and if
we want no current to flow, then Z should be
infinite, so the right-hand side of this equation
needs to vanish.
Step 2: One term is positive imaginary
and the other negative imaginary, so this cancellation will happen whenever |ZL| =|ZC|.
Step 3: This
results in... | |
E3_solver_canonical_llm:lit_em_0129:turn0 | lit_em_0129 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Three charges, each of strength Q (Q > 0) form a fixed
equilater... | **Derivation:**
Step 1: The basic idea is to find the voltage V
at the center of the triangle (defining the voltage infinitely far away to be zero, as usual).
Step 2: We
then use conservation of energy to find the minimum initial kinetic energy, which corresponds to
some minimum initial speed.
Step 3: A little trig sho... | [
"lit_em_0129_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Three charges, each of strength Q (Q > 0) form a fixed
equilater... | **Derivation:**
Step 1: The basic idea is to find the voltage V
at the center of the triangle (defining the voltage infinitely far away to be zero, as usual).
Step 2: We
then use conservation of energy to find the minimum initial kinetic energy, which corresponds to
some minimum initial speed.
Step 3: A little trig sho... | |
E3_solver_canonical_llm:lit_em_0137:turn0 | lit_em_0137 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A coaxial cable consists of a cylindrical inner conductor
with r... | **Derivation:**
Step 1: This is similar to the example of the
spherical capacitor in section 3.6. The electric
field in this geometry was found in section 2.8 to
be proportional to 1/r, by applying Gauss’s law
to a cylindrical Gaussian surface: as the cylinder’s radius grows, its area grows like r to the
first power, s... | [
"lit_em_0137_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A coaxial cable consists of a cylindrical inner conductor
with r... | **Derivation:**
Step 1: This is similar to the example of the
spherical capacitor in section 3.6. The electric
field in this geometry was found in section 2.8 to
be proportional to 1/r, by applying Gauss’s law
to a cylindrical Gaussian surface: as the cylinder’s radius grows, its area grows like r to the
first power, s... | |
E3_solver_canonical_llm:lit_em_0163:turn0 | lit_em_0163 | ELECTROMAGNETISM | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Let a and b be any two numbers (not both zero), and let
u = aˆx ... | **Derivation:**
Step 1: Let v = cˆx +dˆy, where c and d are to
be found. We don’t expect to be able to determine both c and d uniquely, because for any v
that works, so will any nonzero scalar multiple
of it.
Step 2: That is, we only expect to be able to find
the ratio c/d, which expresses how big c is in
proportion to... | [
"lit_em_0163_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Let a and b be any two numbers (not both zero), and let
u = aˆx ... | **Derivation:**
Step 1: Let v = cˆx +dˆy, where c and d are to
be found. We don’t expect to be able to determine both c and d uniquely, because for any v
that works, so will any nonzero scalar multiple
of it.
Step 2: That is, we only expect to be able to find
the ratio c/d, which expresses how big c is in
proportion to... | |
E3_solver_canonical_llm:lit_mech_0178:turn0 | lit_mech_0178 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Let T be the maximum tension that an elevator’s cable
can withst... | **Derivation:**
Step 1: We are supposed to find an equation for
mass based on information about forces and accelerations. Newton’s second law, a =Ftotal/m,
is what relates these three quantities.
Step 2: There are
two forces acting on the elevator: a downward
force from gravity and an upward force from the
cable.
Step ... | [
"lit_mech_0178_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Let T be the maximum tension that an elevator’s cable
can withst... | **Derivation:**
Step 1: We are supposed to find an equation for
mass based on information about forces and accelerations. Newton’s second law, a =Ftotal/m,
is what relates these three quantities.
Step 2: There are
two forces acting on the elevator: a downward
force from gravity and an upward force from the
cable.
Step ... | |
E3_solver_canonical_llm:lit_mech_0205:turn0 | lit_mech_0205 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A physical therapist wants her patient to rehabilitate his injur... | **Derivation:**
Step 1: The total torque required is the torque
needed to lift his arm plus the torque needed
to lift the weight. Since his arm is not changing,
she needs to tell him to set things up so that the
torque needed to lift the weight is also the same
as before.
Step 2: Torque is rF sinθ, and since he is decr... | [
"lit_mech_0205_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A physical therapist wants her patient to rehabilitate his injur... | **Derivation:**
Step 1: The total torque required is the torque
needed to lift his arm plus the torque needed
to lift the weight. Since his arm is not changing,
she needs to tell him to set things up so that the
torque needed to lift the weight is also the same
as before.
Step 2: Torque is rF sinθ, and since he is decr... | |
E3_solver_canonical_llm:lit_mech_0212:turn0 | lit_mech_0212 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A bird is initially flying horizontally east at 21.1 m/s, but on... | **Derivation:**
Step 1: The original velocity vector had vx = 21.1
m/s,vy = 0. The later one hasvx = (21.1 m/s)×
cos 7◦ = 20 .94 m/s and vy = (21 .1 m/s)×
sin 7◦ = 2.57 m/s.
Step 2: The change in the velocity
vector is
∆vx =−0.16 m/s and
∆vy = 2.57 m/s ,
so the acceleration vector has components
ax = ∆vx/∆t =−0.16 m/s2... | [
"lit_mech_0212_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A bird is initially flying horizontally east at 21.1 m/s, but on... | **Derivation:**
Step 1: The original velocity vector had vx = 21.1
m/s,vy = 0. The later one hasvx = (21.1 m/s)×
cos 7◦ = 20 .94 m/s and vy = (21 .1 m/s)×
sin 7◦ = 2.57 m/s.
Step 2: The change in the velocity
vector is
∆vx =−0.16 m/s and
∆vy = 2.57 m/s ,
so the acceleration vector has components
ax = ∆vx/∆t =−0.16 m/s2... | |
E3_solver_canonical_llm:lit_mech_0256:turn0 | lit_mech_0256 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Consider the following passage from Alice in Wonderland, in
whic... | **Derivation:**
Step 1: We’re given distance and acceleration,
and we want to find time. Of the constant acceleration equations, the one that has the right
variables in it is ∆ x = vo∆t + 12a∆t2.
Step 2: The
initial velocity is zero, and solving for ∆ t, we
have ∆t =
2∆x/a. Converting the given distance to SI (meter-ki... | [
"lit_mech_0256_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Consider the following passage from Alice in Wonderland, in
whic... | **Derivation:**
Step 1: We’re given distance and acceleration,
and we want to find time. Of the constant acceleration equations, the one that has the right
variables in it is ∆ x = vo∆t + 12a∆t2.
Step 2: The
initial velocity is zero, and solving for ∆ t, we
have ∆t =
2∆x/a. Converting the given distance to SI (meter-ki... | |
E3_solver_canonical_llm:lit_mech_0287:turn0 | lit_mech_0287 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Cosmic rays are particles from outer space, mostly protons and
a... | **Derivation:**
Step 1: We are given that the KE is on the order
of that of a well-thrown rock, which might be 10
J. This energy would be dissipated in your body
as heat, and you would probably feel it.
Step 2: The momentum would be p =
2mKE , which comes
out to be about 10 −13 kg·m/s if we put in the
mass of a proton.... | [
"lit_mech_0287_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Cosmic rays are particles from outer space, mostly protons and
a... | **Derivation:**
Step 1: We are given that the KE is on the order
of that of a well-thrown rock, which might be 10
J. This energy would be dissipated in your body
as heat, and you would probably feel it.
Step 2: The momentum would be p =
2mKE , which comes
out to be about 10 −13 kg·m/s if we put in the
mass of a proton.... | |
E3_solver_canonical_llm:lit_mech_0300:turn0 | lit_mech_0300 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Two cars go over the same speed bump in a parking lot,
Maria’s M... | **Derivation:**
Step 1: The acceleration is mainly vertical. Each
car’s vy starts out zero, increases as the bump’s
slope gets steeper, reaches a maximum, and then
decreases back to zero as the car reaches the top
of the bump.
Step 2: Riding back down the bump is
similar. The equation a = ∆ v/∆t isn’t strictly
true her... | [
"lit_mech_0300_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Two cars go over the same speed bump in a parking lot,
Maria’s M... | **Derivation:**
Step 1: The acceleration is mainly vertical. Each
car’s vy starts out zero, increases as the bump’s
slope gets steeper, reaches a maximum, and then
decreases back to zero as the car reaches the top
of the bump.
Step 2: Riding back down the bump is
similar. The equation a = ∆ v/∆t isn’t strictly
true her... | |
E3_solver_canonical_llm:lit_mech_0301:turn0 | lit_mech_0301 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A person of mass M stands in the middle of a tightrope,
which is... | **Derivation:**
Step 1: There are three forces acting on the
part of the rope right under the person’s feet:
the two tensions and the normal force of the person’s feet on the rope, which equals the person’s
weight.
Step 2: The vector sum of the three forces must
be zero, i.e. their x components must add up
to zero and ... | [
"lit_mech_0301_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A person of mass M stands in the middle of a tightrope,
which is... | **Derivation:**
Step 1: There are three forces acting on the
part of the rope right under the person’s feet:
the two tensions and the normal force of the person’s feet on the rope, which equals the person’s
weight.
Step 2: The vector sum of the three forces must
be zero, i.e. their x components must add up
to zero and ... | |
E3_solver_canonical_llm:lit_mech_0305:turn0 | lit_mech_0305 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A person on a bicycle is to coast down a ramp of height h and
th... | **Derivation:**
Step 1: Conservation of energy tells us that the
initial energy equals the final energy. What
times should we pick as initial and final?
Step 2: Our
goal is to find out what height the bike has to
start from, so the initial time should be when the
bike is starting out, at the top of the ramp.
Step 3: Th... | [
"lit_mech_0305_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A person on a bicycle is to coast down a ramp of height h and
th... | **Derivation:**
Step 1: Conservation of energy tells us that the
initial energy equals the final energy. What
times should we pick as initial and final?
Step 2: Our
goal is to find out what height the bike has to
start from, so the initial time should be when the
bike is starting out, at the top of the ramp.
Step 3: Th... | |
E3_solver_canonical_llm:lit_mech_0315:turn0 | lit_mech_0315 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A person of weight W stands on the ball of one foot. Find
the te... | **Derivation:**
Step 1: Basically we have a situation with two
equations in two unknowns. There is an equation that says the total torque on the foot is
zero, and another equation that says the total
force on the foot is zero.
Step 2: The two unknowns
are the tension in the calf muscle, T , and the
force exerted by the... | [
"lit_mech_0315_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A person of weight W stands on the ball of one foot. Find
the te... | **Derivation:**
Step 1: Basically we have a situation with two
equations in two unknowns. There is an equation that says the total torque on the foot is
zero, and another equation that says the total
force on the foot is zero.
Step 2: The two unknowns
are the tension in the calf muscle, T , and the
force exerted by the... | |
E3_solver_canonical_llm:lit_mech_0316:turn0 | lit_mech_0316 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Freddi Fish(TM) has a position as a function of time given by
x ... | **Derivation:**
Step 1: From the given information, we can find her
speed v(t) by differentiation, and we can then
find the maximum by the usual technique of setting the derivative equal to zero.
Step 2: That means
taking two derivatives in a row: a second derivative. The second derivative of the position is the
accele... | [
"lit_mech_0316_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Freddi Fish(TM) has a position as a function of time given by
x ... | **Derivation:**
Step 1: From the given information, we can find her
speed v(t) by differentiation, and we can then
find the maximum by the usual technique of setting the derivative equal to zero.
Step 2: That means
taking two derivatives in a row: a second derivative. The second derivative of the position is the
accele... | |
E3_solver_canonical_llm:lit_mech_0327:turn0 | lit_mech_0327 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A learjet traveling due east at 300 mi/hr collides with a
jumbo ... | **Derivation:**
Step 1: Horizontal momentum is conserved, since
there are no external horizontal forces. Let’s pick
masses for the planes of 1 kg and 5 kg – although
the real masses must be thousands of times bigger, it won’t matter as long as the ratio is 5.
Step 2: Let
the positive x axis point east and the positive
... | [
"lit_mech_0327_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A learjet traveling due east at 300 mi/hr collides with a
jumbo ... | **Derivation:**
Step 1: Horizontal momentum is conserved, since
there are no external horizontal forces. Let’s pick
masses for the planes of 1 kg and 5 kg – although
the real masses must be thousands of times bigger, it won’t matter as long as the ratio is 5.
Step 2: Let
the positive x axis point east and the positive
... | |
E3_solver_canonical_llm:lit_mech_0329:turn0 | lit_mech_0329 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Find the period of vertical oscillations of the mass m. The
spri... | **Derivation:**
Step 1: LetL be the amount by which the spring
has been stretched or compressed with respect
to equilibrium, so that its energy is Uspring =
(1/2)kL2.
Step 2: Let y be the height of the mass, and
for convenience, let’s define y = 0 to be the
height at which the spring is relaxed, so that
319
L = 0 coinc... | [
"lit_mech_0329_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Find the period of vertical oscillations of the mass m. The
spri... | **Derivation:**
Step 1: LetL be the amount by which the spring
has been stretched or compressed with respect
to equilibrium, so that its energy is Uspring =
(1/2)kL2.
Step 2: Let y be the height of the mass, and
for convenience, let’s define y = 0 to be the
height at which the spring is relaxed, so that
319
L = 0 coinc... | |
E3_solver_canonical_llm:lit_mech_0330:turn0 | lit_mech_0330 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
We observe that the amplitude of a certain free oscillation
decr... | **Derivation:**
Step 1: The definition of Q says that when
n = Q, the energy falls off by a factor of e2π. Since energy is proportional to the square of the
amplitude, this corresponds to a factor ofZ =eπ
in amplitude.
Step 2: Now we need to generalize this to
the case where the number of oscillations we actually obser... | [
"lit_mech_0330_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
We observe that the amplitude of a certain free oscillation
decr... | **Derivation:**
Step 1: The definition of Q says that when
n = Q, the energy falls off by a factor of e2π. Since energy is proportional to the square of the
amplitude, this corresponds to a factor ofZ =eπ
in amplitude.
Step 2: Now we need to generalize this to
the case where the number of oscillations we actually obser... | |
E3_solver_canonical_llm:lit_mech_0336:turn0 | lit_mech_0336 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Find the error in the following calculation. A student wants
to ... | **Derivation:**
Step 1: The calculation of ∆ v = a∆t is correct,
because the equation it’s based on, a = ∆v/∆t,
is valid for constant acceleration.
Step 2: The calculation of ∆x =v∆t is wrong, because the equation
it’s based on, v = ∆x/∆t, is only valid for constant velocity.
Step 3: We know the velocity is increasing ... | [
"lit_mech_0336_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Find the error in the following calculation. A student wants
to ... | **Derivation:**
Step 1: The calculation of ∆ v = a∆t is correct,
because the equation it’s based on, a = ∆v/∆t,
is valid for constant acceleration.
Step 2: The calculation of ∆x =v∆t is wrong, because the equation
it’s based on, v = ∆x/∆t, is only valid for constant velocity.
Step 3: We know the velocity is increasing ... | |
E3_solver_canonical_llm:lit_mech_0345:turn0 | lit_mech_0345 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
The figure, redrawn from Gray’s Anatomy, shows the tension
of wh... | **Derivation:**
Step 1: We want to find the area under the
graph from x = 0 to x = cL. This area can be
split up into a rectangle plus a triangle sitting
on top of it.
Step 2: To make all the math easier, let’s
start by leaving out the factors ofL andTo, since
these just set the scale on each axis; we’ll start
by calcu... | [
"lit_mech_0345_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
The figure, redrawn from Gray’s Anatomy, shows the tension
of wh... | **Derivation:**
Step 1: We want to find the area under the
graph from x = 0 to x = cL. This area can be
split up into a rectangle plus a triangle sitting
on top of it.
Step 2: To make all the math easier, let’s
start by leaving out the factors ofL andTo, since
these just set the scale on each axis; we’ll start
by calcu... | |
E3_solver_canonical_llm:lit_mech_0355:turn0 | lit_mech_0355 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Acceleration could be defined either as ∆v/∆t or as the slope
of... | **Derivation:**
Step 1: They’re not equivalent. The slope of the
tangent line will only be the same as ∆ v/∆t if
the v−t graph is linear, i.e., if the acceleration
is constant.
Step 2: For instance, suppose I drive my car
for one minute at 50 km/hr, and then over the
course of the second minute I speed up from 50
to 60... | [
"lit_mech_0355_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Acceleration could be defined either as ∆v/∆t or as the slope
of... | **Derivation:**
Step 1: They’re not equivalent. The slope of the
tangent line will only be the same as ∆ v/∆t if
the v−t graph is linear, i.e., if the acceleration
is constant.
Step 2: For instance, suppose I drive my car
for one minute at 50 km/hr, and then over the
course of the second minute I speed up from 50
to 60... | |
E3_solver_canonical_llm:lit_mech_0361:turn0 | lit_mech_0361 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Astronomers have recently observed stars orbiting at very
high s... | **Derivation:**
Step 1: LetM be the mass of the mysterious object, and m the mass of one of the stars orbiting
around it. The relevant equations are Newton’s
second law,
a = Fm ,
Newton’s law of gravity,
F = GMmr2 ,
and the circular-motion equation
a = v2
r .
Step 2: The accelerationa isn’t given, and we don’t want
to ... | [
"lit_mech_0361_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Astronomers have recently observed stars orbiting at very
high s... | **Derivation:**
Step 1: LetM be the mass of the mysterious object, and m the mass of one of the stars orbiting
around it. The relevant equations are Newton’s
second law,
a = Fm ,
Newton’s law of gravity,
F = GMmr2 ,
and the circular-motion equation
a = v2
r .
Step 2: The accelerationa isn’t given, and we don’t want
to ... | |
E3_solver_canonical_llm:lit_mech_0362:turn0 | lit_mech_0362 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
One theory about the destruction of the space shuttle Columbia
i... | **Derivation:**
Step 1: (a) Plugging the data into KE =
(1/2)mv2 gives a kinetic energy of 23 kilojoules. (b) The hundred-times-greater mass increases
the KE by a factor of 100, but KE depends on the
square of the velocity, so reducing the speed by
1/100 cuts the kinetic energy by 1/10,000.
Step 2: The
combined effect ... | [
"lit_mech_0362_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
One theory about the destruction of the space shuttle Columbia
i... | **Derivation:**
Step 1: (a) Plugging the data into KE =
(1/2)mv2 gives a kinetic energy of 23 kilojoules. (b) The hundred-times-greater mass increases
the KE by a factor of 100, but KE depends on the
square of the velocity, so reducing the speed by
1/100 cuts the kinetic energy by 1/10,000.
Step 2: The
combined effect ... | |
E3_solver_canonical_llm:lit_mech_0365:turn0 | lit_mech_0365 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A mass m moving at velocity v collides with a stationary
target ... | **Derivation:**
Step 1: The elegant way to do this is to switch
to the center of mass frame. In that frame, the
balls are initially moving toward each other at
velocities v/2 and−v/2.
Step 2: After the collision, we
can maximize the amount of heat released if we
simply make the two masses stick together and
stop.
Step ... | [
"lit_mech_0365_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A mass m moving at velocity v collides with a stationary
target ... | **Derivation:**
Step 1: The elegant way to do this is to switch
to the center of mass frame. In that frame, the
balls are initially moving toward each other at
velocities v/2 and−v/2.
Step 2: After the collision, we
can maximize the amount of heat released if we
simply make the two masses stick together and
stop.
Step ... | |
E3_solver_canonical_llm:lit_mech_0366:turn0 | lit_mech_0366 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A uniform ladder of mass m and length L leans against a
smooth w... | **Derivation:**
Step 1: The three conditions for equilibrium are:
zero total horizontal force:
F1 cosφ−F2 = 0 (1)
zero total vertical force:
F1 sinφ−mg = 0 (2)
zero total torque:
L
2F2 sinθ− L2F1 sin(φ−θ) = 0
or
F2 sinθ−F1 sin(φ−θ) = 0 (3)
For our numerical check, let’s arbitrarily choose
mg = 1.000 N.
Step 2: L is irr... | [
"lit_mech_0366_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A uniform ladder of mass m and length L leans against a
smooth w... | **Derivation:**
Step 1: The three conditions for equilibrium are:
zero total horizontal force:
F1 cosφ−F2 = 0 (1)
zero total vertical force:
F1 sinφ−mg = 0 (2)
zero total torque:
L
2F2 sinθ− L2F1 sin(φ−θ) = 0
or
F2 sinθ−F1 sin(φ−θ) = 0 (3)
For our numerical check, let’s arbitrarily choose
mg = 1.000 N.
Step 2: L is irr... | |
E3_solver_canonical_llm:lit_mech_0367:turn0 | lit_mech_0367 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A mass m on a spring oscillates around an equilibrium at
x = 0. ... | **Derivation:**
Step 1: I did this by modifying the program
from section 4.6.
1 import math
2 def f(k,b,x):
3 return -k*x-b*x*x*x
4 def period(m,k,b,amplitude,n):
5 print("A=",amplitude," b=",b)
6 x = amplitude
7 v = 0
8 w0 = math.sqrt(k/m) # frequency it would have if b=0
9 t0 = 2.*3.1416/w0 # ...and the corresponding... | [
"lit_mech_0367_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A mass m on a spring oscillates around an equilibrium at
x = 0. ... | **Derivation:**
Step 1: I did this by modifying the program
from section 4.6.
1 import math
2 def f(k,b,x):
3 return -k*x-b*x*x*x
4 def period(m,k,b,amplitude,n):
5 print("A=",amplitude," b=",b)
6 x = amplitude
7 v = 0
8 w0 = math.sqrt(k/m) # frequency it would have if b=0
9 t0 = 2.*3.1416/w0 # ...and the corresponding... | |
E3_solver_canonical_llm:lit_mech_0368:turn0 | lit_mech_0368 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
The goal of this problem is to refine the proportionality
FWHM ∝... | **Derivation:**
Step 1: The force is not constant, so we have
to do the integral
1
2Wdamp =
∫ A
−A
F dx
=
∫ A
−A
−bv dx
To find v as a function of x, we can use conservation of energy:
1
2mv2 + 12kx2 = 12kA2
Solving this for v gives
v =
k
m (A2−x2) ,
so we now have
1
2Wdamp =−
∫ A
−A
b
k
m (A2−x2) dx
=−b
k
m
∫ A
−A
(A2... | [
"lit_mech_0368_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
The goal of this problem is to refine the proportionality
FWHM ∝... | **Derivation:**
Step 1: The force is not constant, so we have
to do the integral
1
2Wdamp =
∫ A
−A
F dx
=
∫ A
−A
−bv dx
To find v as a function of x, we can use conservation of energy:
1
2mv2 + 12kx2 = 12kA2
Solving this for v gives
v =
k
m (A2−x2) ,
so we now have
1
2Wdamp =−
∫ A
−A
b
k
m (A2−x2) dx
=−b
k
m
∫ A
−A
(A2... | |
E3_solver_canonical_llm:lit_mech_0378:turn0 | lit_mech_0378 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
The vertical post rotates at frequency ω. The bead slides
freely... | **Derivation:**
Step 1: Because the bead slides frictionlessly on
the string, there can’t be any difference in tension between the top and bottom segments.
Step 2: The
vector sum of the two forces acting on the ball
lies in the direction that bisects the two strings,
and this direction is the direction of a simple
coni... | [
"lit_mech_0378_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
The vertical post rotates at frequency ω. The bead slides
freely... | **Derivation:**
Step 1: Because the bead slides frictionlessly on
the string, there can’t be any difference in tension between the top and bottom segments.
Step 2: The
vector sum of the two forces acting on the ball
lies in the direction that bisects the two strings,
and this direction is the direction of a simple
coni... | |
E3_solver_canonical_llm:lit_mech_0383:turn0 | lit_mech_0383 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A 10-kg bowling ball moving at 2.0 m/s hits a 1.0-kg bowling
pin... | **Derivation:**
Step 1: Let’s use M for the mass of the ball, U
for its initial velocity, andV for its final velocity. Similarly, letm be the mass of the pin, and v its
final velocity.
Step 2: Conservation of momentum and
energy give
MU =MV +mv
and
1
2MU 2 = 12MV 2 + 12mv2 ,
two equations in the two unknownsV andv.
Ste... | [
"lit_mech_0383_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A 10-kg bowling ball moving at 2.0 m/s hits a 1.0-kg bowling
pin... | **Derivation:**
Step 1: Let’s use M for the mass of the ball, U
for its initial velocity, andV for its final velocity. Similarly, letm be the mass of the pin, and v its
final velocity.
Step 2: Conservation of momentum and
energy give
MU =MV +mv
and
1
2MU 2 = 12MV 2 + 12mv2 ,
two equations in the two unknownsV andv.
Ste... | |
E3_solver_canonical_llm:lit_mech_0384:turn0 | lit_mech_0384 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Continuing problem 15, find an equation for φ in terms of
θ, and... | **Derivation:**
Step 1: In the previous problem, we got three
equations, which involved several variables we
want to get rid of: F1, F2 and m.
Step 2: It should
be possible to solve three equations in three unknowns. We can simplify things right off the bat
by realizing that eq.
Step 3: (2) is useless; it introduces
an... | [
"lit_mech_0384_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
Continuing problem 15, find an equation for φ in terms of
θ, and... | **Derivation:**
Step 1: In the previous problem, we got three
equations, which involved several variables we
want to get rid of: F1, F2 and m.
Step 2: It should
be possible to solve three equations in three unknowns. We can simplify things right off the bat
by realizing that eq.
Step 3: (2) is useless; it introduces
an... | |
E3_solver_canonical_llm:lit_mech_0397:turn0 | lit_mech_0397 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
All stars, including our sun, show variations in their light
out... | **Derivation:**
Step 1: This is only an order-of-magnitude estimate, so let’s make some simplifying approximations. We’ll assume the surface area of the
oceans is the same as the surface area of the
planet (4πR2), and that the density of ice is
about the same as that of water, 1000 kg /m3.
Step 2: Then the amount of en... | [
"lit_mech_0397_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
All stars, including our sun, show variations in their light
out... | **Derivation:**
Step 1: This is only an order-of-magnitude estimate, so let’s make some simplifying approximations. We’ll assume the surface area of the
oceans is the same as the surface area of the
planet (4πR2), and that the density of ice is
about the same as that of water, 1000 kg /m3.
Step 2: Then the amount of en... | |
E3_solver_canonical_llm:lit_mech_0400:turn0 | lit_mech_0400 | MECHANICS | 0 | [] | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A ball of mass 3m collides head-on with an initially stationary
... | **Derivation:**
Step 1: LetV be the large mass’s initial velocity,
V′ its velocity after the collision, andv the small
one’s final velocity.
Step 2: Conservation of momentum
gives
3mV = 3mV′ +mv . Since no energy is converted into heat and sound,
3
2mV 2 = 32mV′2 + 12mv2 .
Step 3: Both equations can be simplified by di... | [
"lit_mech_0400_sol1"
] | E3_solver_canonical_llm | literature_curated | Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with ANSWER:.
PROBLEM:
A ball of mass 3m collides head-on with an initially stationary
... | **Derivation:**
Step 1: LetV be the large mass’s initial velocity,
V′ its velocity after the collision, andv the small
one’s final velocity.
Step 2: Conservation of momentum
gives
3mV = 3mV′ +mv . Since no energy is converted into heat and sound,
3
2mV 2 = 32mV′2 + 12mv2 .
Step 3: Both equations can be simplified by di... |
Adversarial Physics Solver — Experiment E3 (solver_e3_canonical_llm)
Codebase & Pipeline Repository: vital-ar/adversarial_physics_problems_solver
Hugging Face Dataset ID: vital-ar/physics-solver-e3-canonical-llm-v3
Dataset Overview
solver_e3_canonical_llm is Dataset 3 (Model 3 / E3) in the Lexsi AI (CuratorKIT + AlignTune + AuditKIT) progressive data-curation ablation study for the Adversarial Physics Problem Solver–Verifier system.
solver_e3_canonical_llm filters and canonicalizes the 608-problem E2 pool through CuratorKIT Part-2 LLM Quality Gates powered by CohereForAI/aya-expanse-8b, yielding 622 verified Turn 0 physics training examples.
- Role in Ablation Ladder:
E1(452problems) $\rightarrow$E2(608problems) $\rightarrow$E3(622problems) $\rightarrow$E4 Solver(758trajectories) /E4 Verifier(720trajectories). - Teacher / Judge Model:
CohereForAI/aya-expanse-8b. - Target Student Model:
CohereLabs/tiny-aya-global(fine-tuned viaAlignTune).
Splits & Domain Distribution
| Split | File | Examples | Composition / Source |
|---|---|---|---|
train |
train.jsonl |
622 | 585 Curated Crowell textbook problems + 31 Subtopic-grounded SymPy-verified synthetic problems + 6 PhysGym training seeds |
validation |
validation.jsonl |
48 | Leak-free (all-MiniLM-L6-v2 cosine < 0.80) held-out validation split |
test |
test.jsonl |
55 | Leak-free (all-MiniLM-L6-v2 cosine < 0.80) held-out test split |
Training Split Domain Breakdown (622 Examples)
| Physics Domain | E2 Input |
Net Change | Retained | Share |
|---|---|---|---|---|
MECHANICS |
385 | -3 | 382 | 61.4% |
ELECTROMAGNETISM |
117 | +3 | 120 | 19.3% |
MODERN_PHYSICS |
48 | +4 | 52 | 8.4% |
RELATIVITY |
20 | +11 | 31 | 5.0% |
OPTICS |
29 | -10 | 19 | 3.1% |
THERMODYNAMICS |
9 | +9 | 18 | 2.9% |
| Total | 608 | +14 | 622 | 100.0% |
CuratorKIT Part-2 LLM Quality Gates & Adaptive Recovery
curatorkit.gates.hallucination.HallucinationGate(threshold = 0.85): Verified faithfulness and derivation grounding against each source problem and reference derivation.curatorkit.gates.reward.RewardGate(threshold = 0.82,on_judge_error = "reject"): Scored every problem–solution pair across a 6-dimension physics quality rubric.curatorkit.diagnostic.reward_refine.RewardRefiner(max_tokens = 1536) +PostRefinementGate: Regenerated borderline derivations withSTAGE1_PHYSICS_REFINE_PROMPTand enforced deterministic contract checks (canonicalANSWER:sentinel, balanced\left/\rightdelimiters, single-target cleanliness, and zero prompt leakage) before re-judging.curatorkit.gates.diversity.DiversityGate(threshold = 0.82,coverage_field = "domain"): Enforced domain coverage and semantic non-redundancy across the final canonical training set.
Export-Time CuratorKIT Integrity Gates
curatorkit.normalizers.clean.TextCleaner: Normalized whitespace and Unicode math/control characters across642rows.curatorkit.gates.schema.SchemaGate(min_tokens = 20,max_tokens = 8192):642passed,20rejected.curatorkit.normalizers.dedup.ExactDeduplicator:642unique records retained (0exact duplicates removed).AnswerSentinelGate:622passed with canonicalANSWER:sentinel (20rejected).
Schema
Each record in train.jsonl, validation.jsonl, test.jsonl follows the canonical schema below (with instruction, input, and output convenience columns also included for direct AlignTune SFT loading):
{
"trajectory_id": "E3_solver_canonical_llm:physgym_0653:turn0",
"problem_id": "physgym_0653",
"domain": "ELECTROMAGNETISM",
"turn": 0,
"accumulated_directives": [],
"prompt": "Solve the following physics problem step by step (in at most 10 logical steps). State the governing physical equations, perform algebraic substitutions clearly, include SI units, and end with the final answer on a new line prefixed with...",
"target_output": "**Derivation:**\nStep 1: If the ring is a superconducting ring, when it moves in a magnetic field, due to the properties of the superconductor, the magnetic flux in the ring...\n...\nANSWER: v_{0} = \\sqrt{2g a + \\frac{\\pi^{2}B^{2}r^{4}}{m L}}",
"source_candidate_ids": [
"physgym_0653_sol1"
],
"dataset_tier": "E3_solver_canonical_llm",
"source": "physgym_seed"
}
Provenance & Integrity Files
manifest.json—CuratorKITstage gate counts and deduplication report.lexsi_provenance.json—lexsi.provenance/1lineage record consumed byAlignTuneandAuditKIT.checksums.txt— SHA-256 digests of all split, metadata, andREADME.mdfiles.- Project Repository & Codebase: https://github.com/vital-ar/adversarial_physics_problems_solver
- Downloads last month
- 85